The middle part of the slitting machine is equipped with a main shaft for processing paper tubes. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of a set of bearings. Near the base, a compression cylinder is installed. At the upper end of the support rod of the cylinder, a set of support rod bearings is installed to support the main shaft.

   A main tool shaft is installed at the upper end of the equipment, and several blades are arranged on it according to the corresponding gaps. The support frame of the main tool shaft is set at the top of the equipment, and a support cylinder is installed in the middle of the support frame.

Operating requirements of the slitting machine
1.The equipment is required to perform fixed-length slitting processing on entire rolls or sheets of raw materials.
2. Fixed-length slitting control is divided into static and dynamic slitting types.
3. The most important performance indicator of fixed-length slitting is the slitting accuracy, and the consistency of the finished product length is good.

4. The slitting length of the slitting machine can be continuously set. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters.

http://www.paperslitter.com/productdetail/surface-type-slitting-machine.html